WORKPRO Plastic Razor Blade Scraper Kit Review: 3 Scrapers with 120 Blades

The Plastic Razor That Beat My Expectations

I grabbed these expecting a disposable freebie, and six months later I’m still reaching for them every time I paint baseboards. I do painting quite a bit, and I normally always have a little bit of overspray when I’m doing my baseboards white. That’s the job I bought these for, and it’s the job where they surprised me. You can grab the kit I’m using here on Amazon. Three scrapers, 120 blades, and zero scratches on glass. That’s the short version.

What Comes in the Kit

You get three scrapers in three colors and about 120 replacement blades. Purple, green, and blue, so it’s easy to keep one in the paint kit, one at the workbench, and one wherever else you keep landing on a sticker that won’t budge. The blades are plastic, not metal, which is the whole point. They’re sharp enough to lift stubborn residue but they help protect surfaces from scratches the way a steel blade never will. I love it that it comes with actually three of the scrapers instead of one.

Scraping Overspray Off White Baseboards

The ergonomics are the part I keep coming back to. There’s a curvature to the handle, so naturally when you have it in your hand your thumb goes on top and your forefinger tucks underneath. It just fits naturally and comfortable. When I go down to scrape overspray after painting baseboards white, it gets that up very easy, very quickly. If I need to turn my hand and put my forefinger on top instead, it’s just as easy. A small light scrape between my thumb and second finger, forefinger down, and I run it right around the baseline. It clears the overspray in one pass most of the time.

Beyond baseboards, I’ve run these across a car window to lift a registration sticker, scraped dried wood glue off a workbench, and cleaned label residue off a glass jar without a single mark left behind. Every one of those jobs would have made me nervous with a metal blade.

The Plastic Blade Has a Ceiling

Plastic is safe, but it’s still plastic. On light overspray and fresh residue these clear it fast. On something thick and fully cured, you’ll feel the blade give a little and you’ll be making more passes than you would with steel. That’s the trade you’re signing up for. I’d rather make an extra pass or two than gouge a window or a countertop, so it doesn’t bother me, but it’s worth knowing going in. The blades do wear down, which is the reason you get 120 of them. Once an edge dulls, you swap it and keep going. They last quite a long time before that happens.

Get it now

WORKPRO Plastic Razor Scraper Kit

Get the best price on Amazon →

This post contains affiliate links. I may earn a commission at no extra cost to you.

Who Gets the Most Out of These

If you paint, these earn their spot in the kit. Anybody doing trim, baseboards, or window frames deals with overspray, and a plastic razor cleans it off glass without the scratch risk. Homeowners peeling price stickers off new jars, glassware, or appliances get the same benefit. And if you run a 3D printer, the same scraper lifts melted plastic off the bed. I keep one at the workbench and one in the paint bucket, and I reach for whichever is closest.

Plastic Razor vs. a Metal Scraper

A metal razor wins on raw cutting power, and that’s the only place it wins for me. It’ll chew through thick cured paint faster, no argument. But it’ll also scratch the glass, the metal, and the countertop you’re trying to protect. That’s the exact ruined-surface problem this plastic kit solves. On delicate surfaces the plastic blade is the safer choice, and with 120 replacements you’re not babying a single edge. For overspray, decals, and label glue, I don’t miss the metal at all.

My Advice Before You Buy

Keep more than one blade within reach so you’re not hunting for a fresh one mid-job. Swap the blade the moment the edge stops biting, because a dull plastic edge just smears instead of scraping. Let the curvature do the work and keep the angle shallow on glass. And don’t force it through fully cured heavy paint, that’s not the tool’s lane. Used right, shallow angle, fresh blade, no forcing, these clear overspray in one pass and leave glass unmarked. That’s the whole job. Everything else is a bonus.

Pros

• Three scrapers in three colors, so you can stash one in every workspace
• 120 replacement blades means you rarely run out
• Ergonomic curved handle fits naturally in your hand either direction
• Lifts paint overspray off baseboards fast without scratching
• Safe on glass, windows, metal, and appliances

Cons

• Plastic blade struggles on thick, fully cured paint compared to steel
• Edges dull with use, so you’ll cycle through blades on heavy jobs
• Takes an extra pass or two on the toughest residue

Frequently Asked Questions

Will a plastic razor really not scratch glass?

Correct, the plastic blade is designed to reduce scratching on glass and other delicate surfaces. I ran it across windows and painted trim without leaving marks. That’s the main reason to pick this over a metal scraper.

How often do the plastic blades need replacing?

They last quite a long time before dulling, and you swap them once the edge stops biting cleanly. With 120 in the kit you won’t be reordering anytime soon. Heavy jobs on rough residue will burn through them faster.

Can I use it to clean a 3D printer bed?

Yes, the plastic scraper lifts melted plastic and residue off a print bed, which is one of the listed uses. The plastic edge is gentler on the bed surface than metal. Let the bed cool a bit first for the cleanest lift.

Does it work on tough dried adhesive and glue?

It handles sticker glue and label residue well with a shallow angle and light passes. Really stubborn cured adhesive may need a little heat or solvent to soften it first. The scraper then clears the loosened residue easily.

Are the three scrapers different sizes?

They’re the same design in three colors: purple, green, and blue. The color difference just makes it easy to keep one in each work area. All three take the same replacement blades.

Can it damage painted walls or countertops?

The plastic blade is far less likely to gouge than metal, which is the whole reason it exists. Keep the angle shallow and let the blade do the work rather than forcing it. That approach kept my surfaces clean.

Is a plastic razor scraper better than buying single scrapers over time?

Three handles and 120 blades in one box beats buying single scrapers every time one wears out, and it keeps a spare handle in the paint kit, one at the workbench, and one wherever you keep finding stickers that won’t budge.

Do the blades fit other brands of scraper handles?

These blades are made for the WORKPRO handles in the kit, so I’d treat them as a matched set. Many standard plastic scraper blades share a similar shape, but I can’t promise a fit on another brand. Stick with the included handles to be safe.

Get it now

WORKPRO Plastic Razor Scraper Kit

Get the best price on Amazon →

This post contains affiliate links. I may earn a commission at no extra cost to you.

🛍️ Shop everything in this video

Every product mentioned, in one place — these are affiliate links, so I may earn a small commission at no extra cost to you.

🛍️ WORKPRO Plastic Razor Blade Scraper Kit with 120 Blades — check price on Amazon →